Microlab FC 10 116200 Manual Do Utilizador

Technical Information

Amplifier

Total Power:   

 

30 Watt RMS

Power distribution:    

15 Watt x 2 

Harmonic distortion:  

< 0.5 % 1 W 1 kHz

Frequency response:  

80 Hz - 20 kHz

Signal/Noise ratio:    

> 65 dB

Separation:    

 

> 45 dB

Tweeter type:  

 

0.5” x 2

Tweeter rated power:  

5 Watt x 2   8 Ohm

Woofer type:   

 

2.25”

Woofer rated power:  

15 Watt x 2  8 Ohm

Interfaces

Output:  

 

 

Proprietary audio DC plug

Input:   

 

 

3.5mm stereo jack

Frequently Asked Questions (FAQ)

Questions                                                                      Answers

During adjustments, the LED will blink.

Once reached range limits, the LED will remain 
steady.

Check if the audio source is properly paired and 
connected. Secondly check if the 3.5mm stereo 
plug is correctly inserted.

Ensure volume is correctly adjusted

What are the products 
supported? 

Where to place this speaker 

If the problem still exists, please contact the distributor or ask for professional service

Check if the volume is at lower level and the Mp3 
format is recorded at above 196 bitrate

Check the 3.5 mm stereo cable for proper connection
and cable is firmly inserted

Intermittent sound

LED status during volume
adjustments

No Sound

Sound is distorted

It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion

EN

6

Any playback devices such as PC, notebook with USB slot, 
CD/DVD player, Media Players with 3.5mm stereo plug. 

LED illumination

LED on the main speaker indicates power on status.

EN

5

Connections

1.  Connect the left speaker to the rear DC jack (SPK OUT ) of the right speaker (main) . 

2.  Place both speakers on extreme sides of the listening position.

3.  Connect the playback device to the rear 3.5 mm stereo input with the included signal cable.

4.  The playback device such as CD/DVD, Mp3/Mp4 player or T V can be connected to the speaker 

system.

5.  Last, connect the AC power adapter to the rear of the right speaker (DC IN) and to the AC power 

supply source. Please ensure the AC power supply match the power requirement printed at the 
rear panel.

1.  Ensure the master volume is at the lowest setting.

2.  Turn on the main AC power and switch on the speaker system from the side power switch of the 

right speaker.

3.  Start the playback device and song.

4.  Adjust the volume on the media player, and speaker master volume to your preferred listening 

level. 

5.  Depress the + or - buttons on the side of the speaker to adjust the volume level.

Note: it is advisable not to turn the volume too loud or to its extreme volume limit to avoid 

damage to the speaker driver material and impair your hearing. 

Operations

Ideal listening position

and placement

FL - front left
FR - front right

80-FC20-97-0001-01   2012-03-09             

80-FC10-97-0001-01   2012-05-10         (FC20 changed to FC10 / Myriad PRO)           

80-FC10-97-3164-01   2012-08-12                                                   (Multi-language manual)