Epson EH-TW8100 V11H524070LW Manual Do Utilizador

Troubleshooting

81

Indicators

Status

Remedy

(blue)

Projection in pro-
gress

The projector is operating normally.

c

•

Under normal operating conditions, the 

o

 and 

m

 indicators are off.

•

When the Illumination function is set to Off, all indicators are off under normal projection conditions.

s

 Extended - Operation - Illumination 

When the Indicators Provide No Help

Check the problem

Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.

Problem

Page

Problems relating to im-
ages

No images appear.

Projection does not start, the projection area is completely black, or
the projection area is completely blue.

Moving images being projected from a computer are not projected.

"Not supported" is displayed.

"No Signal" is displayed.

Images are fuzzy or out of focus.

Interference or distortion appears in the images.

The image is truncated (large) or small, or only a part of the image is
projected.

Image colors are not right.

The whole image appears purplish or greenish, images are black &
white, or colors appear dull.

*

Images appear dark.

Projection stops automatically.

Problems when projection
starts

The projector does not turn on.

Problems with the remote
control

The remote control does not respond.

Problems with 3D

Cannot project correctly in 3D.

Problems with HDMI

HDMI Link does not function.

The device name is not displayed under device connections.

Problems with WirelessHD Cannot project WirelessHD images.

Interference or distortion appear in WirelessHD images

*

Because color reproduction differs between monitors and computer LCD screens, the image projected by the
projector and the color tones displayed on the monitor may not match, however this is not a fault.