Philips Blu-ray Disc player BDP5010 BDP5010/F7 Manual Do Utilizador

Códigos do produto
BDP5010/F7
Página de 56
35
LIST OF SETTINGS
Category
Menus/Options
Description
Analog Audio
• When HDMI cable is 
connected, make 
sure “HDMI Audio” 
setting is set to “Off” 
to change the 
“Analog Audio” 
setting.
Speaker Setup
• Refer to page 41 
for more 
information.
Sets the speaker configuration to 
match the size/number of your 
speakers.
• You can also output the test tone 
from each speaker by pressing [RED].
Sets the desired measure system.
This measure system will be used for 
“Speaker Distance” setting.
default 
is 10 ft
Select the distance from the listening 
point to the speaker to get the ideal 
delay time.
default 
is 10 ft
0-10 ft
default 
is 10 ft
Yes/No default 
0-12 dB
default 
is 0 dB
Sets the volume level for each 
speaker to get the ideal audio 
balance.
Ratings Lock
• Refer to 
page 41 for 
more 
information.
Sets the rating level for the disc 
playback.
Sets the new password for the 
“Ratings Lock” setting.
The angle icon automatically 
appears on the TV screen when 
playing back content with various 
camera angles available.
“Off”:
The angle icon does not 
automatically appear on the TV 
screen when playing back content 
with various camera angles available.
Sets whether to turn off the unit (to 
the standby mode) automatically 
after 25 minutes of no action since 
the screen saver is activated.
• If the screen saver is off, the unit will be 
turned off after 30 minutes if no action.
Sets the brightness of the front panel 
display.
When “Auto” is selected, the front 
panel display automatically goes dim 
during playback.
Sets whether to activate the screen 
saver after 5 minutes of no action on 
the unit.
Sets the amount of time for 
displaying one picture before 
switching to the next one.
For example, select “5sec” to switch 
the picture every 5 seconds.
Sets the visual effect for the slide 
show transition mode.
“Cut In/Out”:
 The pictures will cut in and out 
sharply as playback progresses.
“Fade In/Out”:
The pictures will fade in and out as 
playback progresses.
In
tro
duc
tio
n
Con
n
ec
ti
on
s
B
asi
c Se
tu
p
P
layb
ack
Othe
rs
F
unc
ti
o
n
 Set
u
p