Alcatel-Lucent OS-LS-6248 OS-LS-6248-US Manual Do Utilizador
Códigos do produto
OS-LS-6248-US
2-18
Installing the Switch
2
Figure 2-4. Attaching the Adhesive Feet
2.
Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
are at least two inches of space on all sides for proper air flow.
3.
If installing a single switch only, go to “Connecting to a Power Source” at the
end of this chapter.
end of this chapter.
4.
If installing multiple switches, attach four adhesive feet to each one. Place each
device squarely on top of the one below, in any order.
device squarely on top of the one below, in any order.
Installing an Optional SFP Transceiver into the Switch
Figure 2-5. Inserting an SFP Transceiver into a Slot
To install an SFP transceiver, do the following:
1.
Consider network and cabling requirements to select an appropriate SFP
transceiver type.
transceiver type.