ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manual Do Utilizador
Códigos do produto
91-003-154001B
P-202H Plus v2 User’s Guide
163
Chapter 15 Introducing the SMT
15.6 Changing the System Password
Change the system password by following the steps shown next.
1 Enter 23 in the main menu to open Menu 23 - System Security.
2 Enter 1 in menu 23 to display Menu 23.1 - System Security - Change Password.
3 Type your existing system password in the Old Password field, for example “1234”, and
press [ENTER]
Figure 74 Menu 23 System Password
4 Type your new system password in the New Password field (up to 30 characters), and
press [ENTER].
11
Remote Node Setup
Use this menu to configure detailed remote node settings (your ISP
is also a remote node) as well as apply WAN filters.
is also a remote node) as well as apply WAN filters.
12
Static Routing Setup
Use this menu to set up static routes.
13
Default Dial-in Setup
Use this menu to set up default dial-in parameters so that your
ZyXEL Device can be used as a dial-in server.
ZyXEL Device can be used as a dial-in server.
14
Dial-in User Setup
Use this menu to configure settings for remote dial-in users.
15
NAT Setup
Use this menu to configure Network Address Translation.
21
Filter and Firewall Setup
Use this menu to configure filters, activate/deactivate the firewall
and view the firewall log.
and view the firewall log.
22
SNMP Configuration
Use this menu to set up SNMP related parameters.
23
System Security
Use this menu to change your password and set up an
authentication server.
authentication server.
24
System Maintenance
This menu provides system status, diagnostics, software upload,
etc.
etc.
26
Schedule Setup
Use this menu to schedule outgoing calls.
27
VPN/ IPSec Setup
Use this menu to configure VPN connections.
99
Exit
Use this to exit from SMT (necessary for remote configuration).
Table 54 Main Menu Summary
#
MENU TITLE
DESCRIPTION
Menu 23.1 - System Security - Change Password
Old Password= ?
New Password= ?
Retype to confirm= ?
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL: