ZyXEL ADSL Prestige 660HW-61 91-004-361001 Manual Do Utilizador

Prestige 660H/HW Series User’s Guide

Chapter 23 Menu 3 LAN Setup

236

Follow the instructions in the following table on how to configure the DHCP fields.    

Table 79   DHCP Ethernet Setup 

DHCP Setup 

DHCP

If set to Server, your Prestige can assign IP addresses, an IP default 

gateway and DNS servers to Windows 95, Windows NT and other systems 

that support the DHCP client.  
If set to None, the DHCP server will be disabled. 
If set to Relay, the Prestige acts as a surrogate DHCP server and relays 

DHCP requests and responses between the remote server and the clients.  

Enter the IP address of the actual, remote DHCP server in the Remote 

DHCP Server in this case.
When DHCP server is used, the following items need to be set:

Client IP Pool Starting 

Address

This field specifies the first of the contiguous addresses in the IP address 

pool.

Size of Client IP Pool

This field specifies the size or count of the IP address pool.

Primary DNS Server
Secondary DNS Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to 

the DHCP clients along with the IP address and the subnet mask. 

Remote DHCP Serve

If Relay is selected in the DHCP field above then enter the IP address of the 

actual remote DHCP server here.

Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.

Table 80   TCP/IP Ethernet Setup 

TCP/IP Setup 

IP Address

Enter the (LAN) IP address of your Prestige in dotted decimal notation

IP Subnet Mask

Your Prestige will automatically calculate the subnet mask based on the IP address 

that you assign.  Unless you are implementing subnetting, use the subnet mask 

computed by the Prestige (refer to the 

 appendix for more 

information).

RIP Direction

Press [

SPACE BAR

] to select the RIP direction.  Choices are Both, In Only, Out 

Only or None. 

Version

Press [

SPACE BAR]

 to select the RIP version.  Choices are RIP-1, RIP-2B or RIP-

2M. 

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to 

establish membership in a Multicast group. The Prestige supports both IGMP 

version 1 (IGMP-v1) and version 2 (IGMP-v2). Press the [

SPACE BAR]

 to enable 

IP Multicasting or select None to disable it. 

IP Policies

Create policies using SMT menu 25 (see 

) and apply them 

on the Prestige LAN interface here.  You can apply up to four IP Policy sets (from 

twelve) by entering their numbers separated by commas. 

Edit IP Alias

The Prestige supports three logical LAN interfaces via its single physical Ethernet 

interface with the Prestige itself as the gateway for each LAN network. Press 

[

SPACE BAR

] to change No to Yes and press [

ENTER

] to display Menu 3.2.1.