ZyXEL ADSL Prestige 660HW-61 91-004-361001 Manual Do Utilizador

Prestige 660H/HW Series User’s Guide

255 

Chapter 26 Remote Node Configuration

Figure 138   Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation) 

         Menu 11.5 - Remote Node Filter
    Input Filter Sets:
      protocol filters=
        device filters=
    Output Filter Sets:
      protocol filters=
        device filters=
    Call Filter Sets:
      protocol filters=
        device filters=

     Enter here to CONFIRM or ESC to CANCEL:

Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options.

In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR] 
to select Yes. Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options.

There are two versions of menu 11.6 for the Prestige, depending on whether you chose VC-
based/LLC-based multiplexing and PPP encapsulation in menu 11.1.

For VC-based multiplexing, by prior agreement, a protocol is assigned a specific virtual 
circuit, for example, VC1 will carry IP. Separate VPI and VCI numbers must be specified for 
each protocol.

Figure 139   Menu 11.6 for VC-based Multiplexing

Menu 11.6 - Remote Node ATM Layer Options
VPI/VCI (VC-Multiplexing)

    VC Options for IP:
      VPI #= 8
      VCI #= 35
      ATM QoS Type= UBR
      Peak Cell Rate (PCR)= 0
      Sustain Cell Rate (SCR)= 0
      Maximum Burst Size (MBS)= 0

VC Options for Bridge:
  VPI #= 1
  VCI #= 36
  ATM QoS Type= N/A
  Peak Cell Rate (PCR)= N/A
  Sustain Cell Rate (SCR)= N/A
  Maximum Burst Size (MBR)= N/A

    Enter here to CONFIRM or ESC to CANCEL:

For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with 
protocol identifying information being contained in each packet header.