ZyXEL 791R 91-004-247001B Manual Do Utilizador

Prestige 791R G.SHDSL Router 

Follow the instructions as shown in the next screen.  

Menu 24.5 - System Maintenance - Backup Configuration 

To transfer the configuration file to your workstation, follow the procedure 

below: 
 

1. Launch the FTP client on your computer. 

2. Type "open" and the IP address of your system. Then type "root" and 

   SMT password as requested. 

3. Locate the 'rom-0' file. 

4. Type 'get rom-0' to back up the current Prestige configuration to 
   your computer. 

 

For details on FTP commands, please consult the documentation of your FTP 

client program. For details on backup using TFTP (note that you must remain 

in this menu to back up using TFTP), please see your Prestige manual. 

 
 

Press ENTER to Exit: 

Step 1.  Launch the FTP client on your computer. 

Step 2.  Enter “open”, followed by a space and the IP address of your Prestige.   

Step 3.  Press [ENTER] when prompted for a username. 

Step 4.  Enter your password as requested (the default is “1234”). 

Step 5.  Enter “bin” to set transfer mode to binary. 

Step 6.  Use “get” to transfer files from the Prestige to the computer, for example, “get rom-0 

config.rom” transfers the configuration file on the Prestige to your computer and renames it 
“config.rom”. See earlier in this chapter for more information on filename conventions. 

Step 7.  Enter “quit” to exit the ftp prompt.  

 

 

Firmware and Configuration Maintenance 

 

15-3