ZyXEL 791R 91-004-247001B Manual Do Utilizador

Prestige 791R G.SHDSL Router 

Call Scheduling  

 

18-3 

How Often  Should this schedule set recur weekly or be used just once only? 

Press the [SPACE BAR] and then [ENTER] to select Once or 
Weekly. Both these options are mutually exclusive.  If Once is 
selected, then all weekday settings are N/A. When Once is 
selected, the schedule rule deletes automatically after the 
scheduled time elapses. 

Once:     

Date 

If you selected Once in the How Often field above, then enter the 
date the set should activate here in year-month-date format. 

2000-01-01 

Weekday: 

Day 

If you selected Weekly in the How Often field above, then select 
the day(s) when the set should activate (and recur) by going to that 
day(s) and pressing [SPACE BAR] to select Yes, then press 
[ENTER]. 

Start Time  Enter the start time when you wish the schedule set to take effect 

in hour-minute format.  

09:00 

Duration 

Enter the maximum length of time this connection is allowed in 
hour-minute format.  

08:00 

Action 

Forced On means that the connection is maintained whether or not 
there is a demand call on the line and will persist for the time period 
specified in the Duration field.  
 
Forced Down means that the connection is blocked whether or not 
there is a demand call on the line.  
 
Enable Dial-On-Demand means that this schedule permits a 
demand call on the line. Disable Dial-On-Demand means that this 
schedule prevents a demand call on the line.  

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 
from the Main Menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or 
PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as 
shown next.