ZyXEL 791R 91-004-247001B Manual Do Utilizador

Prestige 791R G.SHDSL Router 

IP Alias 

Choose Yes to configure the LAN network for the Prestige. 

IP Address 

Enter the IP address of your Prestige in dotted decimal notation 

192.168.2.1 

IP Subnet Mask  Your Prestige will automatically calculate the subnet mask based on 

the IP address that you assign. Unless you are implementing 
subnetting, use the subnet mask computed by the Prestige 

255.255.255.0 

RIP Direction 

Press [

SPACE BAR

] to select the RIP direction.  Choices are None, 

Both, In Only or Out Only. 

Version 

Press [

SPACE BAR]

 to select the RIP version. Choices are RIP-1, 

RIP-2B or RIP-2M. 

Incoming 
Protocol Filters 

Enter the filter set(s) you wish to apply to the incoming traffic 
between this node and the Prestige. 

 

Outgoing 
Protocol Filters 

Enter the filter set(s) you wish to apply to the outgoing traffic between 
this node and the Prestige. 

 

When you have completed this menu, press [

ENTER

] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [

ESC

] at any time to cancel. 

You must enable IP routing for Internet access.  You can enable IP routing in Menu 1 — General Setup.  

To edit menu 1, type in 1 in the main menu and press [ENTER].  Set the Route IP field to Yes by pressing 
[SPACE BAR]. 

                         Menu 1 - General Setup 

                    System Name= P650HW 

                    Location= location 

                    Contact Person's Name=  

                    Domain Name= 

                    Edit Dynamic DNS= No 

 

 

                    Route IP= Yes 

                    Bridge= No 

 

   Press ENTER to Confirm or ESC to Cancel: 

6-8  LAN