ZyXEL Router Prestige 662HW-61 91-004-371001 Manual Do Utilizador

Prestige 662H/HW Series User’s Guide

229

Chapter 19 VPN Screens

End / Subnet Mask When the Local Address Type field is configured to Single, this field is N/A. 

When the Local Address Type field is configured to Range, enter the end (static) 

IP address, in a range of computers on the LAN behind your Prestige. When the 

Local Address Type field is configured to Subnet, this is a subnet mask on the 

LAN behind your Prestige.

Remote

Remote IP addresses must be static and correspond to the remote IPSec router's 

configured local IP addresses. The remote fields do not apply when the Secure 

Gateway IP Address field is configured to 0.0.0.0. In this case only the remote 

IPSec router can initiate the VPN.
Two active SAs cannot have the local and remote IP address(es) both the same. 

Two active SAs can have the same local or remote IP address, but not both. You 

can configure multiple SAs between the same local and remote IP addresses, as 

long as only one is active at any time.

Remote Address 

Type

Use the drop-down menu to choose Single, Range, or Subnet. Select Single 

with a single IP address. Select Range for a specific range of IP addresses. 

Select Subnet to specify IP addresses on a network by their subnet mask.

IP Address Start 

When the Remote Address Type field is configured to Single, enter a (static) IP 

address on the network behind the remote IPSec router. When the Remote 

Address Type field is configured to Range, enter the beginning (static) IP 

address, in a range of computers on the network behind the remote IPSec router. 

When the Remote Address Type field is configured to Subnet, enter a (static) IP 

address on the network behind the remote IPSec router. 

End / Subnet Mask When the Remote Address Type field is configured to Single, this field is N/A. 

When the Remote Address Type field is configured to Range, enter the end 

(static) IP address, in a range of computers on the network behind the remote 

IPSec router. When the Remote Address Type field is configured to Subnet, 

enter a subnet mask on the network behind the remote IPSec router. 

Address 

Information

Local ID Type

Select IP to identify this Prestige by its IP address. 

Select DNS to identify this Prestige by a domain name.

Select E-mail to identify this Prestige by an e-mail address.

Content

When you select IP in the Local ID Type field, type the IP address of your 

computer in the local Content field. The Prestige automatically uses the IP 

address in the My IP Address field (refer to the My IP Address field description) 

if you configure the local Content field to 0.0.0.0 or leave it blank. 
It is recommended that you type an IP address other than 0.0.0.0 in the local 

Content field or use the DNS or E-mail ID type in the following situations.
When there is a NAT router between the two IPSec routers. 
When you want the remote IPSec router to be able to distinguish between VPN 

connection requests that come in from IPSec routers with dynamic WAN IP 

addresses. 
When you select DNS or E-mail in the Local ID Type field, type a domain name 

or e-mail address by which to identify this Prestige in the local Content field. Use 

up to 31 ASCII characters including spaces, although trailing spaces are 

truncated. The domain name or e-mail address is for identification purposes only 

and can be any string.

Table 72   VPN IKE (continued)