ZyXEL Prestige 660HW-61 External 91-004-370001 Manual Do Utilizador
Códigos do produto
91-004-370001
Prestige 660H/HW Series User’s Guide
Chapter 7 Wireless LAN Setup
100
The following table describes the fields in this screen.
Table 24 RADIUS
LABEL
DESCRIPTION
Authentication Server
Active
Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Server IP Address
Enter the IP address of the external authentication server in dotted decimal
notation.
Port Number
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.
Shared Secret
Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the
The key is not sent over the network. This key must be the same on the
external authentication server and Prestige.
Accounting Server
Active
Select Yes from the drop-down list box to enable user authentication
through an external accounting server.
Server IP Address
Enter the IP address of the external accounting server in dotted decimal
notation.
Port Number
The default port of the RADIUS server for accounting is 1813.
You need not change this value unless your network administrator instructs
You need not change this value unless your network administrator instructs
you to do so with additional information.
Shared Secret
Enter a password (up to 31 alphanumeric characters) as the key to be
shared between the external accounting server and the access points.
The key is not sent over the network. This key must be the same on the
The key is not sent over the network. This key must be the same on the
external accounting server and the Prestige.
Back
Click Back to go to the main wireless LAN setup screen.
Apply
Click Apply to save these settings back to the Prestige.
Cancel
Click Cancel to begin configuring this screen again.
7.15 OTIST
OTIST (One-Touch Intelligent Security Technology) allows your Prestige to set the wireless
client to use the same wireless settings as the Prestige.
client to use the same wireless settings as the Prestige.
Note: The wireless client must also support OTIST and have OTIST enabled.
The following are the wireless settings that the Prestige assigns to the wireless client if OTIST
is enabled on both devices and the OTIST setup keys are the same.
is enabled on both devices and the OTIST setup keys are the same.
• SSID
• Security (WEP or WPA-PSK)
• Security (WEP or WPA-PSK)
Note: This will replace the pre-configured wireless settings on the wireless clients