ZyXEL Prestige 660HW-61 External 91-004-370001 Manual Do Utilizador

Prestige 660H/HW Series User’s Guide

Chapter 19 Maintenance

212

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige 
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP 
configuration for the clients. If set to None, DHCP service will be disabled and you must have 
another DHCP server on your LAN, or else the computer must be manually configured.

Click Maintenance, and then the DHCP Table tab. Read-only information here relates to 
your DHCP status. The DHCP table shows current DHCP Client information (including IP 
Address, Host Name and MAC Address) of all network clients using the DHCP server.

Figure 108   DHCP Table

The following table describes the fields in this screen.

Table 66   DHCP Table

Host Name

This is the name of the host computer.

IP Address

This field displays the IP address relative to the Host Name field. 

MAC Address  This field displays the MAC (Media Access Control) address of the computer with the 

displayed host name.
Every Ethernet device has a unique MAC address. The MAC address is assigned at 

the factory and consists of six pairs of hexadecimal characters, for example, 

00:A0:C5:00:00:02.

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this button to apply the new poll interval you entered in the Poll Interval 

field above.

Stop

Click this button to halt the refreshing of the system statistics.

Table 65   System Status: Show Statistics (continued)