Philips Micro music system BTM5000 BTM5000/12 Manual Do Utilizador
Códigos do produto
BTM5000/12
15
EN
5
Press SLEEP/TIMER to confirm.
»
The hour digits begin to blink.
6
Press PRESET/ALBUM / to set the
hour.
7
Press SLEEP/TIMER to confirm.
»
The minute digits begin to blink.
8
Press PRESET/ALBUM / to set the
minute.
9
Press SLEEP/TIMER to confirm.
»
The [VOL] (volume) begins to blink.
10
Press PRESET/ALBUM / to adjust
the volume, then press SLEEP/TIMER to
confirm.
»
The timer is set and activated.
Tip
•
For source selection, you can also press VOL -/+,
PRESET/ALBUM / on the remote control, or
/ , VOLUME on the main unit.
•
For hour/minute/volume adjustment, you can also press
VOL -/+ on the remote control, or / , VOLUME
on the main unit.
Activate and deactivate the alarm
timer
1
Press to switch the unit to standby
mode.
2
Press SLEEP/TIMER repeatedly to activate
or deactivate the timer.
»
If the timer is activated, the display
shows .
»
If the timer is deactivated,
disappears on the display.
Note
•
In audio in and Bluetooth mode, the alarm timer cannot
be set.
•
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.
Play from external audio
device
You can play from an external audio device
such as MP3 player through this unit.
1
Connect the audio device.
• For audio device with red/white audio
output sockets:
Connect a red/white audio cable (not
supplied) to the AUX-IN sockets and
to the audio output sockets on the
audio device.
• For audio device with headphone
sockets:
Connect the audio in cable (not
supplied) to the AUDIO IN socket
and to the headphone socket on the
audio device.
2
Press SOURCE to select AUDIO IN or
AUX source.
3
Play the external audio device.
Adjust display brightness
Note
•
You can adjust the display brightness in standby mode
only.
In standby mode, press RDS/DISPLAY
repeatedly to adjust display brightness.
• Full brightness (100%)
• Half brightness (70%)
• Brightness low (40%)
• Half brightness (70%)
• Brightness low (40%)
Headphone
Plug headphones (not supplied) into the
socket on the unit to listen through the
headphones.