Philips waterproof detail trimmer NT9145/11 NT9145/11 Manual Do Utilizador

Códigos do produto

NT9145/11

Put the battery in the battery compartment.

Make sure the + and - poles of the battery point in the right direction.
Note: The appliance runs on one R6 AA 1.5-volt battery (included). Preferably

use Philips alkaline batteries. A new AA alkaline battery has an operating time

of up to 2 hours.

Slide the battery compartment cover back onto the handle.

Turn the battery compartment cover anticlockwise until the setting

indicator ( %) points to the ‘off’ indication (0).

To avoid damage due to battery leakage:

do not expose the appliance to direct sunlight.

do not expose the appliance to temperatures higher than 35°C.

remove the battery if you are not going to use the appliance for a

month or more.

do not leave an empty battery in the appliance.

attaching and detaching attachments

Note: The precision trimming head and precision shaving head can be attached

and detached in the same way.

To attach one of the attachments, align the locking indicator with

the ‘unlocked’ indication (black upward arrowhead) and put the

attachment on the handle. Then turn the attachment clockwise until

the locking indicator points to the ‘locked’ indication (I).

To detach the attachment turn it anticlockwise until the locking

indicator points to the ‘unlocked’ indication (black upward

arrowhead). Then pull the attachment off the handle.

ENglish

Using the appliance

When you trim your beard for the first time, be careful and test the

appliance on a small part of your arm or leg. Do not move the trimmer

too fast. Make smooth and gentle movements.
If any irritation or allergic reaction occurs, discontinue use immediately.

Do no use the appliance on sensitive or irritated skin.
Trimming with the precision trimming head
With the precision trimming head without precision trimming comb, you

can trim hairs to a length of 1mm, the so-called ‘stubble look’.

Put the precision trimming head on the appliance (see section

‘Attaching and detaching the attachments’ in chapter ‘Preparing for

use’).

Switch on the appliance. Turn the battery compartment cover from

the ‘off’ position (0) to the ‘on’ position (I).

Touch the hairs lightly with the precision trimming head and move it

against the direction of hair growth.

Note: You can use the precision trimming head with the trimmer teeth pointing

towards the skin. You can also use it with the flat part touching the skin and

the teeth pointing in the direction in which you move the appliance.

To switch off the appliance, turn the battery compartment to the ‘off’

indication (0).

ENglish