LANDE 20U 19'' LN-WM20U6045-LG-11 Manual Do Utilizador
Códigos do produto
LN-WM20U6045-LG-11
FEATURES of Rear Wall Section:
All Lande NETbox Wall Cabinets are proper for Rear Section
Unit.
Rear Section is Heavy Duty Welded framed construction. 2,0mm
thickness material welded as multi layer system creates at wall
fixing provision a thickness of 4,0mm.
A PVC cable entry gland plate is available at the wall side
welcomes if any cable comes up from wall, and back section to
be align directly to the provision of cable run through.
19’’ provision located at rear section module, which allows if any
passive less depth cabling component needs to be housed, while
the cable bundles could be housed inside the 100mm depth empty
housing box.
Triangular, positioning brackets buried into the 100mm rear
housing box for allignment and raising a heavy load capability.
Spanner style special locking mechanism captures the rear
100mm box, in the welded 50mm depth frame, which integrates
the rear section to the main NETbox wall cabinet.
Top and Bottom of the rear section module has cable entry
cut-outs closed with Brushed cable entry provisions.
A spesific flange system designed for heavy duty structure,
where 50kgs of front NETbox wall cabinet total load is being
carried without any problem. The 50 kgs of load capacity exists
and performs while cabinet is in swinging position.
*** 50 kgs load capacity measured at integrated frontal wall
cabinet of d:450mm
NETbox Rear Section Module, can be integrated to d:450mm
version wall mounting cabinet, which overall cabinet dimention
to be 450+150=600mm, the load capacity is 50kgs
Once a deeper equipment to be fitted for the same purposes,
NETbox Rear Section can be integrated to d:600mm version wall
mounting cabinet, which overall cabinet dimention to be
600+150=750mm, the load capacity is loosing at a rate of % 30,
than 35 kgs of load could be operated at swinging position.
*** At 600 + 150mm configuration, recommended to use for free
standing purposes.
NETbox Rear Section Units are being sold as a seperate Unit,
later to be integrated to any of available NETbox wall mounting
cabinet. This feature simply offers a flexibility and availability
since if there is stocked wall mounting cabinet available in
warehouses, customer should need to order only the Rear Section
Unit. After removing the rear panel of existing Wall mounting
cabinet, only 4 screws to be tighten again for integration of Rear
Section Unit.
NETbox Rear section swinging direction could be managed
easily, due to assemly placement availability, openning left to
right or right to left is not a problem.
Lande NETbox Rear Sections are in RAL 7016 Anthracite
Grey color from stock.
19” NETbox Double Section for
WA L L M O U N T I N G C A B I N E T S
www.lande.com.tr
19