Philips HTL5110 HTL5110/F7 Manual Do Utilizador

11

English

EN

Note

 

•

The music streaming may be interrupted by obstacles 

between the device and SoundBar, such as wall, metallic 

casing that covers the device, or other devices nearby 

that operate in the same frequency.

 

•

If you want to connect your SoundBar with another 

Bluetooth device, press and hold   Bluetooth on the 

remote control to disconnect the currently connected 

Bluetooth device.

 

•

Philips does not guarantee 100% compatibility with all 

Bluetooth devices.

Auto standby

When playing media from a connected device, 

the SoundBar automatically switches to standby 

if:

•  no button is pressed for 29 minutes, and

•  no audio play from a connected device.

Apply factory settings

You can reset your SoundBar to the default 

settings programmed at the factory.

1 

In AUX mode, within three seconds, press 

VOL-, BASS-,and Treble- .

 

»

When the factory settings restore is 

complete, the SoundBar automatically 

switches off and restarts.

5  Wall mount

Note

 

•

Koninklijke Philips Electronics N.V. bears no 

responsibility for improper wall mounting that results 

in accident, injury or damage. If you have any query, 

contact Philips Consumer Care in your country.

 

•

Before wall mounting, make sure the wall can support 

the weight of your SoundBar.

 

•

Before wall mount, you need not remove the three 

rubber feet at the bottom of the soundbar, otherwise 

the rubber feet cannot be fixed back.

Screw length/diameter

Depending on the type of wall mounting your 

SoundBar, make sure that you use screws of a 

suitable length and diameter.

  

For information about how to wall mount your 

SoundBar, see the quick start guide.

> 25mm

3.5-4mm

4mm

HTL5110_F7_UM_V1.0.indb   11

2013/3/15   17:00:07