Altronix WayPoint3 WAYPOINT3 Folheto

Rev. DSWayPoint3 - 03112013

WayPoint-3 DC Outdoor Power Supply/Charger provides 12VDC or 
24VDC and is designed to be conveniently located where power is required.

WayPoint-3

European Conformity

•  Input: 115VAC, 60Hz, 0.95 amp.
 or 230VAC, 50Hz, 0.6 amp.

•  12VDC or 24VDC selectable output.
•  2.5 amp continuous supply current.
•  Filtered and electronically regulated output.
•  Thermal overload and short circuit protection.

•  Built-in charger for sealed lead acid or
  gel type batteries. 
•  Maximum charge current 500mA.
•  Automatic switch over to stand-by battery.

•  Operating Ambient Temperature: -20º C to 50º C.
•  BTU/Hr.:
 -  12VDC: 15.36 BTU/Hr.
 -  24VDC: 30.71 BTU/Hr.
•  System AC input VA requirement:
 -  115VAC: 109.25VA.
 -  230VAC: 138VA.

•  AC and DC power LED indicators.
•  Ease of installation saves time and
  eliminates costly labor.
•  Includes battery leads.

•  NEMA 4/4X, IP66-11 Rated enclosure for
  outdoor use.
•  Lightweight molded fiberglass reinforced polyester
  enclosure is corrosion resistant and does not contain
 halogens.
•  Lockable stainless steel latches.
•  Integral flanges simplify wall or pole mounting.
•  Enclosure Dimensions (H x W x D approx.):
  13.31” (338.074 mm) x 11.31” (287.274 mm)
 x 5.59” (141.986 mm).
•  Product weight (approx.): 9.2 lbs. (5.19 kg).
•  Shipping weight (approx.): 10.5 lbs. (5.78 kg).

PMK1 pole mount kit is designed to simplify installation of outdoor units.
•  Accommodates 2”- 8”(diameter) poles.
•  Kit includes:
 -  Two (2) powder coated steel mount brackets.
 -  Four (4) stainless steel bolts.
 -  Four (4) stainless steel lock washers.
 -  Two (2) wormgear quick release straps.

PMK1