Alpine CDA-137BTi CDA-137BTI Manual Do Utilizador
Códigos do produto
CDA-137BTI
23
-EN
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
starts from the CD data portion of the disc.
Setting item: Play Mode
Setting contents:
CD-DA (Initial setting) / CDDA&MP3/WMA
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA&MP3/WMA:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)
change discs.)
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending
upon the button pressed.
upon the button pressed.
Setting item: Beep
Setting contents:
OFF / ON (Initial setting)
Setting the External Digital Input
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H800) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
You can change the Digital AUX name display when Digital AUX is set
to ON. Press ENTER when Digital AUX is set to ON, and select
Digital AUX name by turning the Rotary encoder, then press
ENTER. After that, turn the Rotary encoder to select the desired
Digital AUX name.
(PXA-H800) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
You can change the Digital AUX name display when Digital AUX is set
to ON. Press ENTER when Digital AUX is set to ON, and select
Digital AUX name by turning the Rotary encoder, then press
ENTER. After that, turn the Rotary encoder to select the desired
Digital AUX name.
Setting item: Digital AUX
Setting contents:
OFF (Initial setting) / ON
Notes
• Press SOURCE, and select the D.Aux mode, and adjust the volume,
etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound may
continue to be output, even though the source is changed to another
one. If this occurs, set the DVD player’s power to OFF.
one. If this occurs, set the DVD player’s power to OFF.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN is set to ON. Press
ENTER when AUX IN is set to ON, and select AUX Name by
turning the Rotary encoder, and then press ENTER.
After that, turn the Rotary encoder to select the desired AUX name. If
the KCA-410C is connected, it is possible to select two AUX names.
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN is set to ON. Press
ENTER when AUX IN is set to ON, and select AUX Name by
turning the Rotary encoder, and then press ENTER.
After that, turn the Rotary encoder to select the desired AUX name. If
the KCA-410C is connected, it is possible to select two AUX names.
Setting item: AUX IN
Setting contents:
OFF (Initial setting) / ON
OFF:
When set to OFF, AUX source cannot be selected.
ON
*
:
Set to ON when a portable device is connected. If SOURCE
is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
input to the unit.
* You can change the AUX Name display when AUX IN is set to
ON. Press ENTER when AUX IN is set to ON, and select
AUX Name by turning the Rotary encoder, then press
ENTER. After that, turn the Rotary encoder to select the
desired AUX Name.
AUX Name by turning the Rotary encoder, then press
ENTER. After that, turn the Rotary encoder to select the
desired AUX Name.
Note
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE to select AUX mode and
then press BAND to select your desired device.
then press BAND to select your desired device.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
improved by stopping the power supply of the built-in amplifier.
Setting item: Power IC
Setting contents:
OFF / ON (Initial setting)
OFF :
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and can not drive speakers.
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and can not drive speakers.
ON :
The speakers are driven by the built-in amplifier.
Note
• No sound is produced by the system when the Power IC is set to OFF.
POWER IC OFF:
Front
Left
Left
Amplifier
Front
Right
Right
Rear
Left
Left
Amplifier
Rear
Right
Right
POWER IC ON:
Speakers
SPEAKER
RIGHT FRONT
RIGHT FRONT
Front
Right
Right
SPEAKER
RIGHT REAR
RIGHT REAR
Rear
Right
Right
SPEAKER
LEFT REAR
LEFT REAR
Rear
Left
Left
SPEAKER
LEFT FRONT
LEFT FRONT
Front
Left
Left