Addonics RT5835HEU3 Manual Do Utilizador
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
INTRODUCTION
The RAID Tower V is built basing on the Storage Tower platform that
features five 5.25" drive bays in a sturdy and small foot print chassis
with a stylish front bezel. Depending on the model, up to eight 3.5"
hard drives can be installed into the RAID Tower V. The drives can be
configured as individual drive or as a RAID set and be connected to
the computer via the high speed eSATA or USB 3.0/2.0 connection.
Each model comes with everything required for connecting to a
computer. All you need is to add your own hard drives and configure
the RAID via a set of dip switches or Windows software utility
depending on the model of the RAID Tower.
About This Model:
features five 5.25" drive bays in a sturdy and small foot print chassis
with a stylish front bezel. Depending on the model, up to eight 3.5"
hard drives can be installed into the RAID Tower V. The drives can be
configured as individual drive or as a RAID set and be connected to
the computer via the high speed eSATA or USB 3.0/2.0 connection.
Each model comes with everything required for connecting to a
computer. All you need is to add your own hard drives and configure
the RAID via a set of dip switches or Windows software utility
depending on the model of the RAID Tower.
About This Model:
The RT5835HEU3 supports up to eight SATA 3.5" drives. Using the Disk Array, drives are added or removed like
tape cartridge from each drive bay with no special tool required. The RT5835HEU3 connects to the system via
two eSATA ports or two USB 3.0/2.0 ports.
tape cartridge from each drive bay with no special tool required. The RT5835HEU3 connects to the system via
two eSATA ports or two USB 3.0/2.0 ports.
RAID Tower V
Model: RT5835HEU3