B&B Electronics EIRP410-2SFP-T Folheto

Página de 2
www
.
bb
-
elec
.
com
 
|
 
 
10 Port Industrial ethernet switch 
with 2 rJ-45/sFP combo Ports 
for gigabit ethernet
EIRP410-2SFP-T
10 Port Industrial ethernet switch 
with 2 rJ-45/sFP combo Ports 
for gigabit ethernet
EIRP410-2SFP-T
The EIRP410-2SFP-T is a 10 Port unmanaged Industrial Ethernet Switch. 
In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP Combo ports 
to accommodate Gigabit Ethernet.
small Form-factor Pluggable (sFP) Port: The SFP Ports provide flexibility 
when planning a network. Modules are available in multiple fiber formats. 
If an SFP module is not inserted, the associated combo port can be used 
with standard RJ-45 copper. 
   
high-speed transmissions:  The switch includes a switch controller that 
automatically senses transmission speed (10/100/1000 Mbps). The RJ-45 
interface also auto-detects MDI or MDI-X, eliminating the requirement for 
a crossover cable. Each port is buffered and supports store-and-forward 
protocol.
dual Power input: To reduce the risk of power failure, the switch has two 
48 VDC power inputs. If the power fails, the switch will automatically use 
the secondary power input.  Also, if the power goes out the corresponding 
P1 or P2 LED will go out and the Fault LED will light.  The contacts for the 
alarm output will also open.
Flexible Mounting: IP30 metal enclosure - DIN or Panel mounted.
Power Over Ethernet (PoE); The eight 10/100 ports are classified as power 
sourcing equipment (PSE) . These ports can be used to power IEEE 802.3af 
compliant powered devices (PD), eliminating the need for a separate 
power supply for each device. (15.4W per port)
wide operating temperature: With an operating temperature of -40 
to 75°C (-40 to 167°F), this switch is suitable for use in harsh industrial 
environments.
easy troubleshooting: There are two LED indicators for each port that 
display the link status and transmission speed.  Three LED indicators for 
power (P1, P2 and Fault) show power status. FWD LEDs on each PoE port 
indicate when a powered device is connected. These indicators allow 
you to quickly diagnose and correct problems and ensure your network 
remains reliable.
•  Eight 10/100 BaseT 802.3af End Point PoE Ports
•  Two RJ-45/SFP 100/1000 Combo Slots for Gigabit Ethernet
•  UL, cUL CE/EN 60950
•  Wide Operating Temperature (-40 to 75C)
•  DIN Rail or Panel Mount
Product FeAtures
AccessorIes
SDR-240-48 - DIN-Rail Power Supply, 10A, 240W, 48V
C5UMB3FBL -  3 ft. (1 M)- Blue - Category 5e UTP Patch Cord
DFMM-LCLC-1M - Multi-Mode Duplex Fiber Cable, LC To LC, 1 Meter
DFSM-LCLC-1M - Single-Mode Duplex Fiber Cable, LC To LC, 1 Meter
SFP-1000SX-M-550M-T - SFP Module, 1000Base-SX, Multi-mode 550m, LC 
Connector (-40 to 85°C)
SFP-100FX-M-2KM-T - SFP Module, 100Base-FX, Multi-mode 2km, LC Connector 
(-40 to 85°C)
SFP-1000LX-S-10KM-T - SFP Module, 1000Base-LX, Single-mode 10km, LC 
Connector (-40 to 85°C)
SFP-1000LX-S-20KM-T - SFP Module, 1000Base-LX, Single-mode 20km, LC 
Connector (-40 to 85°C)
SFP-100FX-S-30KM-T - SFP Module, 100Base-FX, Single-mode 30km, LC 
Connector (-40 to 85°C)
orderIng InFormAtIon
Model nuMBer
descriPtion
EIRP410-2SFP-T
Industrial Gigabit Switch (8 PoE, 2 CU/SFP)
Power Over Ethernet Sourcing
EIRP410-2SFP-T_3713ds