Philips E5 Wireless Surround-on-Demand Speakers CSS7235Y CSS7235Y/12 Manual Do Utilizador
Códigos do produto
CSS7235Y/12
13
EN
4 Use your
product
This section helps you use this product to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch this product to the correct source
for other devices.
Adjust the volume
1
1
Press +/- (Volume) to increase or decrease
a volume level.
• To mute sound, press (Mute).
• To restore the sound, press (Mute)
again or press +/- (Volume).
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Dock the surround speakers onto the
main unit.
2
Press SURR. SOUND ON/OFF to turn
surround mode on or off.
• On: Create a surround listening
experience. Four-channel audio sound.
Ideal for party music.
• Off: Two-channel stereo sound. Ideal
for listening to music.
Note
•
If the surround speakers are undocked from the main
unit, it is fixed to surround mode only.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of this product.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
»
If the treble or bass is set to the
maximum or minimum, the white LED
on the main unit lights up for two
seconds.
2
To reset the bass and treble to the default
setting, press RESET .
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
It also compresses the sound dynamics,
increasing the volume for quiet scenes and
decreasing the volume for loud scenes.
1
Press AUTO VOL. ON/OFF to turn auto
volume on or off.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO SYNC +/- to synchronize
the audio with the video.
• AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.
»
If the value of sound delay is set to
the maximum or minimum, the white
LED on the main unit lights up for two
seconds.