ZyXEL 202H 91-003-194001B Manual Do Utilizador
Códigos do produto
91-003-194001B
P-202H Plus v2 User’s Guide
119
Chapter 11 VPN Screens
Figure 50 VPN Summary
The following table describes the labels in this screen.
Table 33 VPN Summary
LABEL
DESCRIPTION
No.
This is the VPN policy index number. Click a number to edit VPN policies.
Name
This field displays the identification name for this VPN policy.
Active
This field displays whether the VPN policy is active or not. A Yes signifies that this
VPN policy is active. No signifies that this VPN policy is not active.
Local Address
This is the IP address of the computer on your local network behind your ZyXEL
Device.
The same (static) IP address is displayed twice when the Local Address Type
The same (static) IP address is displayed twice when the Local Address Type
field in the VPN-IKE (or VPN-Manual Key) screen is configured to Single.
The beginning and ending (static) IP addresses, in a range of computers are
The beginning and ending (static) IP addresses, in a range of computers are
displayed when the Local Address Type field in the VPN-IKE (or VPN-Manual
Key) screen is configured to Range.
A (static) IP address and a subnet mask are displayed when the Local Address
A (static) IP address and a subnet mask are displayed when the Local Address
Type field in the VPN-IKE (or VPN-Manual Key) screen is configured to Subnet.
Remote Address
This is the IP address(es) of computer(s) on the remote network behind the
remote IPSec router.
This field displays N/A when the Secure Gateway IP Address field is set to
This field displays N/A when the Secure Gateway IP Address field is set to
0.0.0.0. In this case only the remote IPSec router can initiate the VPN.
The same (static) IP address is displayed twice when the Remote Address Type
The same (static) IP address is displayed twice when the Remote Address Type
field in the VPN-IKE (or VPN-Manual Key) screen is configured to Single.
The beginning and ending (static) IP addresses, in a range of computers are
The beginning and ending (static) IP addresses, in a range of computers are
displayed when the Remote Address Type field in the VPN-IKE (or VPN-Manual
Key) screen is configured to Range.
A (static) IP address and a subnet mask are displayed when the Remote Address
A (static) IP address and a subnet mask are displayed when the Remote Address
Type field in the VPN-IKE (or VPN-Manual Key) screen is configured to Subnet.
Encap.
This field displays Tunnel or Transport mode (Tunnel is the default selection).
Algorithm
This field displays the security protocols used for an SA.
Both AH and ESP increase ZyXEL Device processing requirements and
Both AH and ESP increase ZyXEL Device processing requirements and
communications latency (delay).
Secure Gateway
IP
This is the static WAN IP address or URL of the remote IPSec router. This field
displays 0.0.0.0 when you configure the Secure Gateway IP Address field in the
VPN-IKE screen to 0.0.0.0.
Back
Click this button to return to the previous screen.