ZyXEL 202H 91-003-194001B Manual Do Utilizador

P-202H Plus v2 User’s Guide

167

Chapter 16 Menu 1 General Setup

2 Fill in the required fields. Refer to the table shown next for more information about these 

fields.

Note: If you have a private WAN IP address, then you cannot use Dynamic DNS.

To configure Dynamic DNS, go to Menu 1 - General Setup and select Yes in the Edit 
Dynamic DNS field. Press [ENTER] to display Menu 1.1 - Configure Dynamic DNS as 
shown next.

Figure 76   Menu 1.1 Configure Dynamic DNS 

Table 55   Menu 1 General Setup

System Name

Choose a descriptive name for identification purposes. It is recommended you 

enter your computer’s “Computer name” in this field. This name can be up to 30 

alphanumeric characters long. Spaces are not allowed, but dashes “-” and 

underscores "_" are accepted.

Location

Enter the geographic location (up to 31 characters) of your ZyXEL Device.

Contact Person's 

Name

Enter the name (up to 30 characters) of the person in charge of this ZyXEL 

Device.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP 

may assign a domain name via DHCP. You can go to menu 24.8 and type "sys 

domainname" to see the current domain name used by your router.
The domain name entered by you is given priority over the ISP assigned domain 

name. If you want to clear this field just press [SPACE BAR] and then [ENTER]. 

Edit Dynamic DNS Press [SPACE BAR] and then [ENTER] to select Yes or No (default). Select Yes 

to configure Menu 1.1: Configure Dynamic DNS discussed next.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.

  Menu 1.1 - Configure Dynamic DNS

 Service Provider= WWW.DynDNS.ORG
 Active= No
 Host=
 EMAIL=
 USER=
 Password= ********
 Enable Wildcard= No

  Press ENTER to Confirm or ESC to Cancel: