ZyXEL 202H 91-003-194001B Manual Do Utilizador

P-202H Plus v2 User’s Guide

Chapter 20 Remote Node Configuration

188

Call Direction

If this parameter is set to Both, your ZyXEL Device can both place and receive 

calls to/from this remote node.
If set to Incoming, your ZyXEL Device will not place a call to this remote node.
If set to Outgoing, your ZyXEL Device will drop any incoming calls from this 

remote node.
Several other fields in this menu depend on this parameter. For example, in order 

to enable Callback, the Call Direction must be set to Both.

Incoming:

Rem Login

Enter the login name that this remote node will use when it calls your ZyXEL 

Device.
The login name in this field combined with the Rem Password will be used to 

authenticate this node.

Rem Password

Enter the password used when this remote node calls your ZyXEL Device.

Rem CLID

This field is applicable only if Call Direction is either set to Both or Incoming. 

Otherwise, a N/A appears in the field.
This is the Calling Line ID (the telephone number of the calling party) of this 

remote node.
If you enable the CLID Authen field in Menu 13 - Default Dial-In Setup, your 

ZyXEL Device will check the CLID in the incoming call against the CLIDs in the 

database. If no match is found and CLID Authen is set to Required, the call will 

be dropped.

Call Back

This field is applicable only if Call Direction is set to Both. Otherwise, a N/A 

appears in the field.
This field determines whether or not your ZyXEL Device will call back after 

receiving a call from this remote node.
If this option is enabled, your ZyXEL Device will disconnect the initial call from this 

node and call it back at the Outgoing Primary Phone Number (see

 

Outgoing

My Login

This is a required field if Call Direction is either Both or Outgoing. Enter the login 

name for your ZyXEL Device when it calls this remote node.

My Password

This is a required field if Call Direction is either Both or Outgoing. Enter the 

password for your ZyXEL Device when it calls this remote node.

Authen

This field sets the authentication protocol used for outgoing calls. Options for this 

field are:
CHAP/PAP - Your ZyXEL Device will accept either CHAP or PAP when requested 

by this remote node.
CHAP - accept CHAP only. 
PAP - accept PAP only.

Pri(mary) 

Sec(ondary) 

Phone #

Your ZyXEL Device always calls this remote node using the Primary Phone 

number first for a dial-up line.
If the Primary Phone number is busy or does not answer, your ZyXEL Device will 

dial the Secondary Phone number if available.
Some areas require dialing the pound sign # before the phone number for local 

calls. A # symbol may be included at the beginning of the phone numbers as 

required.

Edit PPP Options

To edit the PPP options for this remote node, move the cursor to this field. Press 

[SPACE BAR] and then [ENTER] to select Yes and press [ENTER]. This will bring 

you to Menu 11.2 - Remote Node PPP Options. For more information on 

configuring PPP options, see

 

.

Table 64   Menu 11.1 Remote Node Profile