ZyXEL 202H 91-003-194001B Manual Do Utilizador

P-202H Plus v2 User’s Guide

Chapter 28 System Information and Diagnosis

258

This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.

These tools include updates on system status, port status, log and trace capabilities and 
upgrades for the system software. This chapter describes how to use these tools in detail.

Type 24 in the main menu to open Menu 24 – System Maintenance, as shown in the 
following figure.

Figure 157   Menu 24 System Maintenance

The first selection, System Status gives you information on the status and statistics of the 
ports, as shown next (see 

). System Status is a tool that can be used to 

monitor your ZyXEL Device.

To get to System Status, type 24 to go to Menu 24 - System Maintenance. From this menu, 
type 1. System Status. There are two commands in Menu 24.1 - System Maintenance - 
Status. Entering 1 resets the counters; [ESC] takes you back to the previous screen.

The following table describes the fields present in Menu 24.1 - System Maintenance - Status 
which are read-only and meant for diagnostic purposes.

Menu 24 - System Maintenance

1.  System Status
2.  System Information and Console Port Speed
3.  Log and Trace
4.  Diagnostic
5.  Backup Configuration
6.  Restore Configuration
7.  Upload Firmware
8.  Command Interpreter Mode                         
9.  Call Control
10. Time and Date Setting
11. Remote Management Setup