ZyXEL 202H 91-003-194001B Manual Do Utilizador

P-202H Plus v2 User’s Guide

277

Chapter 29 Firmware and Configuration File Maintenance

3 Press [ENTER] when prompted for a username.

4 Enter your password as requested (the default is “1234”).

5 Enter “bin” to set transfer mode to binary.

6 Find the “rom” file (on your computer) that you want to restore to your ZyXEL Device.

7 Use “put” to transfer files from the ZyXEL Device to the computer, for example, “put 

config.rom rom-0” transfers the configuration file “config.rom” on your computer to the 
ZyXEL Device. See earlier in this chapter for more information on filename conventions.

8 Enter “quit” to exit the ftp prompt. The ZyXEL Device will automatically restart after a 

successful restore process.

Figure 176   Restore Using FTP Session Example

Restore configuration via console port by following the HyperTerminal procedure shown next. 
Procedures using other serial communications programs should be similar.

1 Display menu 24.6 and enter “y” at the following screen.

Figure 177   System Maintenance: Restore Configuration

2 The following screen indicates that the Xmodem download has started. 

Figure 178   System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the 

following screen.

ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit

Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):

Starting XMODEM download (CRC mode) ...CCCCCCCCC