ZyXEL P-336M 802.11g Wireless MIMO Firewall Router 191000G0336M Manual Do Utilizador
Códigos do produto
191000G0336M
ZyXEL P-336M User’s Guide
29
Chapter 3 Basic
By implementing PPPoE directly on the P-336M (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the P-336M does that part
of the task. Furthermore, with NAT, all of the LAN computers will have access.
computers on the LAN do not need PPPoE software installed, since the P-336M does that part
of the task. Furthermore, with NAT, all of the LAN computers will have access.
Select PPPoE in the WAN screen.
Figure 8 Basic: WAN: PPPoE
The following table describes the related fields in this screen.
Table 8 Basic: WAN: PPPoE
LABEL
DESCRIPTION
MODES
WAN
Select PPPoE if your ISP gives you Internet access account information (such as
the username and password).
Username
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Verify Password
Type your password again to make sure that you have entered is correctly.
Service Name
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPoE server.
Reconnect Mode
Specify how you want to re-establish an Internet connection after the idle timeout.
Select Always On when you want your connection up all the time. The P-336M
Select Always On when you want your connection up all the time. The P-336M
will try to bring up the connection automatically if it is disconnected.
Select On Demand when you don't want the connection up all the time and
Select On Demand when you don't want the connection up all the time and
specify an idle time-out in the Maximum Idle Timeout field.
Select Manual when you want to manually re-establish the connection if it is
Select Manual when you want to manually re-establish the connection if it is
disconnected.
Maximum Idle Time This value specifies the time in seconds that elapses before the P-336M
automatically disconnects from the PPPoE server.