Sanyo EDUCATION PROJECTOR PLC-XE31LMP PLC-XE31LMP Manual Do Utilizador

THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.

Before operating this projector, read this manual thoroughly 

and operate the projector properly.  

This projector provides many convenient features and 

functions.  Operating the projector properly enables you to 

manage those features and maintains it in better condition for

a considerable time.

Improper operation may result in not only shortening the 

product-life, but also malfunctions, fire hazard, or other 

accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections and try 
the solutions in the “Troubleshooting” section in the end of 
this booklet.  If the problem still persists, contact the dealer 
where you purchased the projector or the service center.

– This projector produces intense light from the projection

lens.  Do not stare directly into the lens as much as
possible.  Eye damage could result.  Be especially careful
that children do not stare directly into the beam.

– Install the projector in a proper position.  If not, it may

result in a fire hazard.

– Provide appropriate space on the top, sides and rear of the

projector cabinet for allowing air circulation and cooling the
projector.  Minimum clearance must be maintained.  If the
projector is to be built into a compartment or similarly
enclosed, the minimum distances must be maintained.  Do
not cover the ventilation slot on the projector.  Heat build-
up can reduce the service life of your projector, and can
also be dangerous.

– If the projector is not to be used for an extended time,

unplug the projector from the power outlet.

0.7'(20cm)

1.5'(50cm)

3'(1m)

1.5'(50cm)

SIDE and TOP

REAR

Not for use in a computer room as defined in the Standard for 
the Protection of Electronic Computer/Data Processing 
Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que 
définie dans la norme ANSI/NFPA 75 Standard for Protection 
of Electronic Computer/Data Processing Equipment 

Your SANYO product is designed and
manufactured with high quality
materials and components which can be
recycled and reused.

This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.

Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.

Please help us to conserve the environment we live in! 

When hanging the projector from the
ceiling, clean air intake vents, air fil-
ters, or top of the projector periodical-
ly with a vacuum cleaner.  If you leave
the projector without cleaning for a
long time, the dust will block the oper-
ation of the cooling function, and it
may cause a breakdown or a disaster.