Philips CD Soundmachine AZ105S AZ105S/05 Manual Do Utilizador
Códigos do produto
AZ105S/05
8
EN
4 Play
Play disc
1
Switch the source selector to CD.
2
Lift to open the disc compartment.
3
Insert a disc with the printed side facing up,
then close the disc compartment.
»
Play starts automatically.
Control play
/
Select an audio file;
Press and hold to fast-forward
or fast-reverse the track during
playback, then release to resume
play.
Pause or resume play.
Stop play.
REPEAT
[ ]: Play the current track
repeatedly.
[
]: Play all tracks repeatedly.
SHUFFLE
[ ]: Play tracks randomly.
- VOLUME + Adjust volume.
Enhance bass
To turn dynamic bass boost on or off, slide DBB
switch to ON or OFF.
Program tracks
You can program a maximum of 20 tracks.
1
Press to stop playback.
2
Press PROG to activate the program
mode.
»
[PROG] (program) begin to blink.
3
Press / to select a track number,
and then press PROG to confirm.
4
Repeat steps 3 to program more tracks.
5
Press
to play the programmed tracks.
»
During play, [PROG] (program) and
the preset number are displayed.
• To erase the program, press twice.
Listen to FM radio
Note
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
1
Switch the source selector to FM.
2
Rotate - TUNING + to tune to an FM
radio station.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Switch the source selector to Audio-in.
2
Connect an audio cable (3.5mm, not
supplied) to:
• the Audio-in socket on the unit.
• the headphone socket on an external
device.
3
Play the external device (see the device's
user manual).
Note
•
The Audio-in socket is not for headphones.