IQinVision Alliance-pro IQA33WI-A3 Manual Do Utilizador
Códigos do produto
IQA33WI-A3
Architectural and Engineering Specification
IQA33WI, IQA33WE, IQA33WX
Page 4 of 14
Revision: (07302013)
EE. The IP dome camera shall have a feature (Lightgrabber™II) that enhances camera sensitivity by
increasing the integration time of the CMOS sensor.
FF. The IP dome camera shall provide automatic white balance, automatic exposure, gain control,
electronic shutter, and backlight compensation.
GG. The IP dome camera shall provide user configurable saturation, contrast, brightness, and
sharpness controls from the web-interface.
HH. The IP dome camera shall provide four fully configurable motion detection areas with
adjustments for sensitivity and size to detect motion in various lighting conditions.
II. The IP dome camera shall have user configurable access hours to limit access to the camera
video streams based on weekdays and or weekends.
JJ. The IP dome camera shall provide a video flip and rotate function to allow the image to be
digitally rotated 180 degrees, or to flip the image horizontally or vertically.
KK. The IP dome camera shall have an analog service port that can be configured for NTSC or PAL
(1Vp-p) for installation and setup of field-of-view and focus.
LL. The IP cameras shall have a continuous analog video output that can be configured for NTSC or
PAL (1Vp-p) video formats.
MM.
The IP dome camera shall provide selectable AC Lighting control for 50Hz or 60Hz
lighting.
NN. The IP dome camera shall transmit full duplex, bi-directional (two-way) audio that is
synchronized with the H.264 video stream.
OO. The IP dome camera shall support DTS (Direct-To-Storage) for recording of time lapse and event
recording using network attached storage.
PP. The IP dome camera shall have a physical I/O with 1 input and 1 output that can be configured
as normally open (NO) or normally closed (NC).
QQ. The IP dome camera shall support on camera storage of time lapse and event recording using
micro SD Class 6+ media or higher.