Philips Micro music system DCM3020 DCM3020/79 Manual Do Utilizador

Códigos do produto
DCM3020/79
Página de 24
9
EN
3  Get started
Caution
 
Use of controls or adjustments or performance of 
procedures other than herein may result in hazardous 
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in 
sequence.
If you contact Philips, you will be asked for the 
model and serial number of this apparatus. The 
model number and serial number are on the 
bottom of the apparatus. Write the numbers 
here: 
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
 
For optimal sound, use the supplied speakers only.
 
Connect only speakers with impedance that is the 
same or higher than the supplied speakers. Refer to the 
Specifications section of this manual.
Insert the speaker wires completely into the 
speaker input sockets on the back of the unit.
 
Connect FM antenna
Tip
 
For optimal reception, fully extend and adjust the 
position of the antenna.
Connect the supplied FM antenna to the FM 
ANTENNA jack on the main unit.
Connect power
Caution
 
Risk of product damage! Ensure that the power voltage 
corresponds to the voltage printed on the back or 
underside of the apparatus.
 
Risk of electric shock! When you unplug the AC 
adaptor, always pull the plug from the socket. Never 
pull the cord.
 
Before connecting the AC adaptor, ensure you have 
completed all other connections.
Connect the power adaptor to: 
•  the AC MAIN~ jack on the main unit.
•  the wall outlet.
 
Demonstrate the features
After connecting the power, the micro 
music system starts to demonstrate 
features automatically.
In the standby mode, you also can 
demonstrate features by pressing   until 
"DEMO ON" is displayed.
 
»
The features are displayed one by one 
across the display panel.
•  To turn off the demonstration, press   again.
DCM3020_79_UM_V2.0.indd   9
12/30/2013   5:51:58 PM