Philips Hand blender HR1372/90 HR1372/90 Manual Do Utilizador

worldwide guarantee leaflet). If there is no Consumer Care Centre in 

your country, go to your local Philips dealer. 

This chapter summarises the most common problems you could 

encounter with the appliance. If you are unable to solve the problem with 

the information below, contact the Consumer Care Centre in your 

country. 

Problem

Solution

The appliance 

does not work.

This appliance is equipped with overheat 

protection. If the appliance overheats, it switches 

off automatically. Unplug the appliance and let it 

cool down for 5 minutes. Then put the mains plug 

back into the wall socket and switch on the 

appliance again. Please contact your Philips dealer 

or an authorised Philips service centre if the 

overheat protection is activated too often.

The appliance 

suddenly stops 

working.

Some hard ingredients may block the blades. 

Release the normal speed button or the turbo 

speed button to switch off the appliance, detach 

the motor unit and remove the ingredients that 

block the blades.

The motor unit 

gives off an 

unpleasant smell 

the first few 

times the 

appliance is used.

This is not unusual. If the appliance continues to 

give off this smell after a few times, check the 

quantities you are processing and the processing 

time.

13