Philips FWM211 FWM211/37 Manual Do Utilizador

16 EN

9 Troubleshooting

Warning

 

•

Never remove the casing of this device.

To keep the warranty valid, never try to repair 

the system yourself. 

If you encounter problems when using this 

device, check the following points before 

requesting service. If the problem remains 

unsolved, go to the Philips Web page  

(www.philips.com/support). When you contact 

Philips, make sure that the device is nearby 

and the model number and serial number are 

available.
No power

 • Ensure that the AC power plug of the unit 

is connected properly.

 • Ensure that there is power at the AC 

outlet.

 • To save power, the system switches off 

automatically 15 minutes after track 

play reaches the end and no control is 

operated.

No sound or poor sound

 • Adjust the volume.

 • Check that the speakers are connected 

correctly.

 • Check if the stripped speaker wires are 

clamped.

No response from the Hi-Fi system

 • Disconnect and reconnect the AC power 

plug, then turn on the system again.

 • As a power-saving feature, the unit 

switches off automatically 15 minutes after 

track play reaches the end and no control 

is operated.

Remote control does not work

 • Before you press any function button, first 

select the correct source with the remote 

control instead of the main unit.

 • Reduce the distance between the remote 

control and the unit.

 • Insert the battery with its polarities (+/– 

signs) aligned as indicated.

 • Replace the battery.

 • Aim the remote control directly at the 

sensor on the front of the unit.

No disc detected

 • Insert a disc.

 • Check if the disc is inserted upside down.

 • Wait until the moisture condensation at 

the lens has cleared.

 • Replace or clean the disc.

 • Use a finalized CD or correct format disc.

Poor radio reception

 • Increase the distance between the unit and 

your TV  or VCR.

 • Fully extend the FM antenna.

Alarm does not work

 • Set the clock/alarm correctly.

Clock/alarm setting erased

 • Power has been interrupted or the power 

plug has been disconnected. 

 • Reset the clock/alarm.

USB device not supported

 • The USB device is incompatible with the 

unit. Try another one.

FWM211_37_UM_V1.0.indb   16

8/30/2012   9:43:34 AM