Deutsche Telekom Tiptel 1020 1081520 Manual Do Utilizador
Códigos do produto
1081520
Telephone functions / making calls
15
To end the call, press Loudspeaker
again (same as putting down the
receiver).
again (same as putting down the
receiver).
The line is disconnected.
When the headset is plugged into the connector, the hands-free function is
not available. Instead the headset is used for the conversation.
not available. Instead the headset is used for the conversation.
Transferring calls / flash (R button)
On most telephone systems, the R button can be used to transfer calls. Refer to the
operating instructions for your telephone system or ask your system administrator.
operating instructions for your telephone system or ask your system administrator.
Accept call, e.g. with the telephone
receiver.
receiver.
You can speak to the person at the other
end and say the call is being transferred.
end and say the call is being transferred.
Press the R button.
…
Use the numeric keypad to enter the
required call recipient.
required call recipient.
The connection is established.
If the line is busy, you can recon-
nect to the caller by pressing the R
button.
nect to the caller by pressing the R
button.
The R button must be pressed twice on
many telephone systems.
many telephone systems.
Tell the caller the call is being trans-
ferred or simply put down the re-
ceiver.
ferred or simply put down the re-
ceiver.
The call is transferred.
This process can vary depending on telephone system. For many functions
initiated with a flash (R button), setting the flash from short to long may also
be required (see also Page 24, "Settings").
initiated with a flash (R button), setting the flash from short to long may also
be required (see also Page 24, "Settings").