Sandisk U110 SSD 2.5" 128GB SDSA6GM-128G Folheto

951 SanDisk Drive 
Milpitas, CA 95035-7933, USA
www.sandisk.com

businesspartners@sandisk.com

SanDisk is a trademark of SanDisk Corporation, registered in the United States and other coun-

tries. nCache is a trademark of SanDisk Corporation.  Other brand names mentioned herein are 

for identification purposes only and may be the trademarks of their respective holder(s).

Specifications subject to change without notice.

1

  Approximations based on an industry metric, introduced by SanDisk, that quantifies how much data can be written to a SSD in its lifespan expressed in 

terabytes written (TBW). Data is written using typical PC transfer size, written at a constant rate over the life of the SSD and data is retained for at least 1 year 

upon TBW exhaustion. Based on SanDisk internal measurements, a typical client PC user writes 4 GB/day.

2

 1GB = 1,000,000,000 bytes.  Actual user capacity less.

3

 nCache™ acceleration technology is a large Non Volatile Write Cache, a unique feature in SanDisk SSDs that improves random write performance to ensure an 

improved user experience. Studies show that modern operating systems mostly access the storage device using 4k access blocks. The cache is filled during 

these small write commands and emptied during idle time when the host is not accessing the drive, with no risk of data loss. For a typical everyday use, the 

write performance that the users see is the nCache™ (burst) high performance, and not steady state (sustained) SanDisk U110 SSD performance. Based on 

IOmeter 4K random write test.

4

 Up to stated speed. Based on internal testing; performance may vary depending upon drive capacity, host device, OS and application. 1 megabyte (MB) = 1   

million bytes.

5

 With Slumber (SATA PHY state) power mode and DIPM enabled. Lower power modes can be achieved by implementing advanced low power management 

techniques. Technical specifications are preliminary and subject to change.

6

 With DevSlp power mode and DIPM enabled. Lower power modes can be achieved by implementing advanced low power management techniques. Technical 

specifications are preliminary and subject to change.

7

 MTBF – Mean Time Between Failures based on part stress analysis for 64GB.

SanDisk

®

 U110 SSD Product Features and Specifications

Specifications are preliminary and subject to change

Device

U110

Form Factor

Interface

SATA Revision III 6Gb/s

Capacity (GB)

2

Performance

4

Sequential Read 

MB/s

Sequential Write 

MB/s

Random Read 4k IOPS

Random Write Sustained 4k IOPS

Endurance

1

 TBW

MTBF

7

Up to 2,000,000 hours

Size

Weight

Low Power Consumption

DC Supply

Slumber Power Mode (Typical)

5

20mW @ 5.0V, 17mW @ 3.3V

DevSlp Power Mode (Typical)

6

7mW @ 5.0V, 5.5mW @ 3.3V

(Active Power (Typical

600mW (read), 625mW (write) @ 5.0V

 

575mW (read), 550mW (write) @ 3.3V

Environmental Specifications

Operating Temperatures

   0°C to +70°C

Storage Temperatures

 -55°C to +85°C

Acoustic Noise

0dB

Other

Supporting Features

 TRIM, SMART Commands, Advanced Flash

Management, NCQ

OS  Support

 Windows® XP, 7, 8, Google Chrome™ OS

Warranty

3 Year

Description

P/N

SanDisk U110 SSD 2.5” 7mm Cased 64GB

SDSA6GM-064G

SanDisk U110 SSD 2.5" 7mm Cased 128GB

SDSA6GM-128G

64, 128

64GB       128GB

470          470

195           380

8500       9000

890         1090

30           60

2.5” Cased

2.5” Cased - 30.4 gr

100.5mm x 70mm x 7mm

5.0V, +3.3V, ±5%