Sandisk U110 SSD 2.5" 64GB SDSA6GM-064G Folheto
Códigos do produto
SDSA6GM-064G
SOLID STATE FOR BUSINESS
Corporate Headquarters:
951 SanDisk Drive
Milpitas, CA 95035-7933, USA
www.sandisk.com
Milpitas, CA 95035-7933, USA
www.sandisk.com
Contact information
businesspartners@sandisk.com
SanDisk is a trademark of SanDisk Corporation, registered in the United States and other coun-
tries. nCache is a trademark of SanDisk Corporation. Other brand names mentioned herein are
for identification purposes only and may be the trademarks of their respective holder(s).
Specifications subject to change without notice.
1
Approximations based on an industry metric, introduced by SanDisk, that quantifies how much data can be written to a SSD in its lifespan expressed in
terabytes written (TBW). Data is written using typical PC transfer size, written at a constant rate over the life of the SSD and data is retained for at least 1 year
upon TBW exhaustion. Based on SanDisk internal measurements, a typical client PC user writes 4 GB/day.
2
1GB = 1,000,000,000 bytes. Actual user capacity less.
3
nCache™ acceleration technology is a large Non Volatile Write Cache, a unique feature in SanDisk SSDs that improves random write performance to ensure an
improved user experience. Studies show that modern operating systems mostly access the storage device using 4k access blocks. The cache is filled during
these small write commands and emptied during idle time when the host is not accessing the drive, with no risk of data loss. For a typical everyday use, the
write performance that the users see is the nCache™ (burst) high performance, and not steady state (sustained) SanDisk U110 SSD performance. Based on
IOmeter 4K random write test.
4
Up to stated speed. Based on internal testing; performance may vary depending upon drive capacity, host device, OS and application. 1 megabyte (MB) = 1
million bytes.
5
With Slumber (SATA PHY state) power mode and DIPM enabled. Lower power modes can be achieved by implementing advanced low power management
techniques. Technical specifications are preliminary and subject to change.
6
With DevSlp power mode and DIPM enabled. Lower power modes can be achieved by implementing advanced low power management techniques. Technical
specifications are preliminary and subject to change.
7
MTBF – Mean Time Between Failures based on part stress analysis for 64GB.
SanDisk
®
U110 SSD Product Features and Specifications
Specifications are preliminary and subject to change
Device
U110
Form Factor
Interface
SATA Revision III 6Gb/s
Capacity (GB)
2
Performance
4
Sequential Read
MB/s
Sequential Write
MB/s
Random Read 4k IOPS
Random Write Sustained 4k IOPS
Endurance
1
TBW
MTBF
7
Up to 2,000,000 hours
Size
Weight
Low Power Consumption
DC Supply
Slumber Power Mode (Typical)
5
20mW @ 5.0V, 17mW @ 3.3V
DevSlp Power Mode (Typical)
6
7mW @ 5.0V, 5.5mW @ 3.3V
(Active Power (Typical
600mW (read), 625mW (write) @ 5.0V
575mW (read), 550mW (write) @ 3.3V
Environmental Specifications
Operating Temperatures
0°C to +70°C
Storage Temperatures
-55°C to +85°C
Acoustic Noise
0dB
Other
Supporting Features
TRIM, SMART Commands, Advanced Flash
Management, NCQ
OS Support
Windows® XP, 7, 8, Google Chrome™ OS
Warranty
3 Year
Ordering Information
Description
P/N
SanDisk U110 SSD 2.5” 7mm Cased 64GB
SDSA6GM-064G
SanDisk U110 SSD 2.5" 7mm Cased 128GB
SDSA6GM-128G
64, 128
64GB 128GB
470 470
195 380
8500 9000
890 1090
30 60
2.5” Cased
2.5” Cased - 30.4 gr
100.5mm x 70mm x 7mm
5.0V, +3.3V, ±5%