Sanyo Projector PLCXU83 PLC-XU83 Manual Do Utilizador

Press the Point

7 8

buttons to switch On/Off.  This function

decides to display On-Screen Displays.
On .........................Show all the On-Screen Displays.  Use 

this function when you want to project 
images after the lamp becomes bright 
enough.  Factory default setting is this 
mode.

Countdown off ......Show the input image instead of the  

countdown when turning on the
projector.  Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.

Off .........................Do not show On-Screen Displays. 

except;

● 

On-Screen Menu 

●

“Power off?” message 

● 

P-Timer 

●

“No signal” message for Power management item (p50)

● 

”Please wait...” message

● 

White arrows for True item in the Screen Menu (p37)

Press the Point

7 8

buttons to switch On/Off.  When this

function is “On,” a blue image is displayed while the input
signal is not detected. 

This function corrects distortion of a projected image.
Select either Store or Reset with the Point

7 8 

buttons, and

then press the SELECT button.  The keystone dialog box
will appear.  Correct keystone with the Point 

ed

buttons.

(p25)

Store .........store the keystone correction even when the 

AC power cord is unplugged.

Reset ........reset the keystone correction when the AC 

power cord is unplugged.