Cisco Intel E5-2609v2 4C 2.5GHz UCS-CPU-E52609BC= Manual Do Utilizador

 lists the capabilities and features of the base server. Details about how to configure the server for 

a particular feature or capability (for example, number of processors, disk drives, or amount of memory) 
are provided in 

.

NOTE:  NOTE: The B200 M3 blade server requires UCS Manager (UCSM) to operate as 
part of the UCS system.

■

The B200 M3 with E5-2600 CPUs requires UCSM 2.0.2(q) or later

■

The B200 M3 with E5-2600 v2 CPUs requires UCSM 2.1.3 or later

Chassis

The UCS B200 M3 Blade Server mounts in a Cisco UCS 5100 series blade 

server chassis

CPU

One or two Intel® E5-2600 v2 or E5-2600 series processor family CPUs

Chipset

Intel® C600 series chipset

Memory

24 total slots for registered ECC DIMMs for up to 768 GB total memory 

capacity (B200 M3 configured with 2 CPUs using 32 GB DIMMs)

I/O

Mezzanine adapters:

■

One connector for Cisco’s VIC 1240 adapter, which provides Ethernet and 

Fibre Channel over Ethernet (FCoE)

■

One connector for various types of Cisco adapters, Emulex or QLogic 

adapters, and Cisco UCS Storage Accelerator adapters.

Storage controller 

LSI Logic SAS 2004 integrated controller

■

SAS/SATA support

■

RAID 0 and 1 

Internal storage devices

Up to two optional, front-accessible, hot-swappable 2.5-inch small form 
factor (SFF) SAS or SATA solid-state disks (SSDs) or hard disk drives (HDDs).

An internal USB 2.0 port is also supported. A 4 GB USB 2.0 device is available 
from Cisco.

NOTE:  The integrated RAID controller does not implement a write 
cache. However, servers with two HDDs and RAID controllers with 
cache lack the ability to match the performance of RAID’ed SSD 
without cache, which can be configured with this server.