HP DL360p Gen8 470065-821 Manual Do Utilizador
Códigos do produto
470065-821
Power Supply not included - choose from Power Options section
NOTE: With new options available for Networking solutions and Rack Rail Kits these
options are no longer standard on-board with this Model Part Number. Please see the
Networking and HP Rack Options below for optional required options.
options are no longer standard on-board with this Model Part Number. Please see the
Networking and HP Rack Options below for optional required options.
HP ProLiant DL360p Gen8 10 SFF Configure-to-order Server
666532-B21
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
Drive Cage - 10-Small Form Factor
Drive Cage - 10-Small Form Factor
NOTE: The 10 SFF drive cage requires cache with the P420i order to function properly.
24 DIMM slots for RDIMM, UDIMM and HDIMM SmartMemory installation
NOTE: LRDIMMs cannot be used in the 10 SFF drive configuration.
24 DIMM slots for RDIMM, UDIMM and HDIMM SmartMemory installation
NOTE: LRDIMMs cannot be used in the 10 SFF drive configuration.
(1) FlexibleLOM connection point: (see Step2: HP FlexibleLOM NIC section below for NIC
choices to populate the embedded connector)
Smart Array P420i Controller (Cache connection for 512MB, 1GB and 2GB FBWC options)
choices to populate the embedded connector)
Smart Array P420i Controller (Cache connection for 512MB, 1GB and 2GB FBWC options)
NOTE: A cache module is required for the P420i when used with the 10 SFF drive cage.
I/O slots - 2 Slots come standard:
Slot 1 - Low Profile x 8 PCIe 3.0
Slot 2 - Full-Height/Half-Length x 16 PCIe 3.0
Slot 2 - Full-Height/Half-Length x 16 PCIe 3.0
System Fans - 6 (2 additional fans included with second processor)
USB - 4 Rear, 2 Front, 1 Internal
1 Internal SD slot
On System Server Management Processor - HP iLO 4 (embedded)
SID - System Insight Display(Active Health Indicator)
Power Supply not included - choose from Power Options section
USB - 4 Rear, 2 Front, 1 Internal
1 Internal SD slot
On System Server Management Processor - HP iLO 4 (embedded)
SID - System Insight Display(Active Health Indicator)
Power Supply not included - choose from Power Options section
NOTE: With new options available for Networking solutions and Rack Rail Kits these
options are no longer standard on-board with this Model Part Number. Please see the
Networking and HP Rack Options below for optional required options.
options are no longer standard on-board with this Model Part Number. Please see the
Networking and HP Rack Options below for optional required options.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
noted)
HP Processors
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21
Entry Processors - E5-2600 v2 series Processors
NOTE: All support up to 1333MHz memory speeds.
HP DL360p Gen8 Intel® Xeon® E5-2609v2 (2.5GHz/4-core/10MB/80W) FIO Processor Kit
712741-L21
HP DL360p Gen8 Intel® Xeon® E5-2603v2 (1.8GHz/4-core/10MB/80W) FIO Processor Kit
712743-L21
Base Processors - E5-2600 v2 series Processors
NOTE: All support up to1600MHz DDR3 memory speeds.
HP DL360p Gen8 Intel® Xeon® E5-2640v2 (2.0GHz/8-core/20MB/95W) FIO Processor Kit
712731-L21
HP DL360p Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) FIO Processor Kit
712733-L21
HP DL360p Gen8 Intel® Xeon® E5-2620v2 (2.1GHz/6-core/15MB/80W) FIO Processor Kit
712735-L21
HP DL360p Gen8 Intel® Xeon® E5-2650Lv2 (1.7GHz/10-core/25MB/70W) FIO Processor
Kit
Kit
712779-L21
QuickSpecs
HP ProLiant DL360p Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14211 North America — Version 47 — December 13, 2013
Page 34