Addonics R1MSAS Folheto
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
INTRODUCTION
Model: R1MSAS
The Addonics RAID Rack is a family of 1U and 4U Rackmount chassis with
removable drive systems for easily adding and removing hard drives. Comes
bundled with all the necessary connecting cables for attaching to your system,
these RAID Racks are designed to accommodate from four 3.5" SATA hard
drive in a 1U Rack to as many as twenty 3.5" SATA hard drives in a 4U Rack. It
is the ideal storage solution for video storage, storage farm or any applications
that require a high capacity, reliable storage system.
removable drive systems for easily adding and removing hard drives. Comes
bundled with all the necessary connecting cables for attaching to your system,
these RAID Racks are designed to accommodate from four 3.5" SATA hard
drive in a 1U Rack to as many as twenty 3.5" SATA hard drives in a 4U Rack. It
is the ideal storage solution for video storage, storage farm or any applications
that require a high capacity, reliable storage system.
You can start your RAID Rack with as little as one hard drive and expand by
adding more hard drives as your storage requirement grows. Depending on the
model, the hard drives can be connected to the system with eSATA, USB 3.0 ,
mini SAS or Firewire cables. The 1U RAID Rack offers choice of models with Port Multipliers or with simple direct drive
connection to system via eSATA or mini SAS cables. For the 4U RAID Rack, there is also choice of models with hot
swappable redundant power supply for mission critical applications.
adding more hard drives as your storage requirement grows. Depending on the
model, the hard drives can be connected to the system with eSATA, USB 3.0 ,
mini SAS or Firewire cables. The 1U RAID Rack offers choice of models with Port Multipliers or with simple direct drive
connection to system via eSATA or mini SAS cables. For the 4U RAID Rack, there is also choice of models with hot
swappable redundant power supply for mission critical applications.
About This Model
The R1MSAS is a 1U RAID Rack that accomodates as many as four 3.5" SATA hard drives (or 2.5" SATA hard drives
using Addonics Snap-In 25 adatper), which are connected to a mini SAS bridge mounted on the back of the unit. All four
drives are connected to a system equipped with a mini SAS connector (SFF-8088) via a single mini SAS cable. The
integrated Snap-In bay provides the convenience in adding or removing drives directly like tape cartridges from each bay
without any special tool.
using Addonics Snap-In 25 adatper), which are connected to a mini SAS bridge mounted on the back of the unit. All four
drives are connected to a system equipped with a mini SAS connector (SFF-8088) via a single mini SAS cable. The
integrated Snap-In bay provides the convenience in adding or removing drives directly like tape cartridges from each bay
without any special tool.
1U RAID Rack with mini SAS, SFF-8088