Philips Smart All-in-One S221C3AFD S221C3AFD/00 Manual Do Utilizador

5

2. Setting up the monitor

Insert your SD card

1.  Disconnect the power cord.
2.  Insert your SDHC card to the card slot.

Connect for VGA/HDMI input

1.  Connect with VGA or HDMI cable from 

your PC or AV device to SMART All-in-

One.

2.  Connect power cord to SMART All-in-One 

firmly and press the power button on.

3.  The SMART All-in-One turns on and 

enters the previous source input selected.

4.  Press the input button   to select VGA or 

HDMI source.

Connect to either WiFi or Ethernet for 

SMART All-in-One input

1.  Connect RJ-45 LAN cable to your LAN 

port for wired connection.

2.  Connect power cord to SMART All-in-One 

firmly and press the power button on.

3.  The SMART All-in-One turns on and 

enters the previous source input. selected

4.  Press the input button   to select 

Android source.

5.  Turn on the WiFi or Ethernet function in 

the Android system settings screen.

   Adjusting viewing angle

For optimal viewing, it is recommended to look 

at the full face of the SMART All-in-One, then 

adjust the SMART All-in-One’s angle to your 

own preference.
The SMART All-in-One's tilted angle is 

adjustable from 12° to 54°. 

  Note

•  Do not touch the LCD screen when you 

adjust the angle. It may cause damage or 

break the LCD screen.

•  Careful attention is required not to catch 

your fingers or hands when you adjust the 

angle.

•  It is recommended to stabilize with a fixed 

point in order to lock the stand if the tilted 

angle is equal to or over 12°.

•  Do not adjust the tilt angle less than 12°. 

The monitor may fall caused by instability.

•  For displays with glossy bezels the user 

should consider the placement of the 

display as the bezel may cause disturbing 

reflections from surrounding light and 

bright surfaces.