Tycon Systems TP-SCPOE-1248 Ficha De Dados
TP-SCPOE Charge Controller Spec Rev 5 13-Apr-12 Specifications Subject to Change Without Notice
POE /Solar Charge Controllers
Features
Dual Input - Charges 12V or 24V Batteries from Solar Panel and / or Passive POE
Built in DC to DC converter with various Passive POE output voltages available:
12V,18V,24V,48V
Compact and high temperature operation
Low self consumption < 0.5W
Applications
Remote Power Systems; Surveillance, Sensors
Wireless Stations ; AP / Client / Repeaters
UPS Systems ; Lighting, Fences, Gates
Description
Tycon Power Systems unique POE/Solar charge controllers have dual inputs to charge batteries from a POE source
and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical
applications. The solar panel input takes priority so that when the sun is shining the grid power usage is minimized.
They have a built in POE inserter with DC to DC converter that delivers 12V, 18V, 24V or 48V at the POE port. They
have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge.
and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical
applications. The solar panel input takes priority so that when the sun is shining the grid power usage is minimized.
They have a built in POE inserter with DC to DC converter that delivers 12V, 18V, 24V or 48V at the POE port. They
have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge.
They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if
battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.
Solar and Battery Connections are via 5 screw terminals for wire size up to 10AWG. POE Input and Output is via 2
RJ45 shielded connectors. There is a secondary output connector on the back with 5 screw terminals for connecting
other electronics to the controller using up to 10AWG wire. This secondary output is equal to the battery voltage except
it also has overvoltage protection. The controllers are externally fused with a standard replaceable fuse.
battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.
Solar and Battery Connections are via 5 screw terminals for wire size up to 10AWG. POE Input and Output is via 2
RJ45 shielded connectors. There is a secondary output connector on the back with 5 screw terminals for connecting
other electronics to the controller using up to 10AWG wire. This secondary output is equal to the battery voltage except
it also has overvoltage protection. The controllers are externally fused with a standard replaceable fuse.
DATA SHEET
TP-SCPOE
TP-SCPOE Charge Controller
There are two separate 12V output
connections Gnd (or V-) and +12V (or V+):
Gnd-1 and +12V-1
Gnd-2 and +12V-2
FG = Frame Ground – Do not connect this to
the GND 1 or 2 terminals. Frame Ground
may be left unconnected or connected to
earth ground.
connections Gnd (or V-) and +12V (or V+):
Gnd-1 and +12V-1
Gnd-2 and +12V-2
FG = Frame Ground – Do not connect this to
the GND 1 or 2 terminals. Frame Ground
may be left unconnected or connected to
earth ground.