Tycon Systems TP-DCDC-1248-M Ficha De Dados
DC to DC Converter
Features
Input Voltage 9-36VDC; Output 18V, 24V or 48VDC
IEEE 802.3af compliant model and non-compliant models
Dual Inputs for connecting 2 power sources
Integrated 10/100MB POE Inserter
High Power up to 24W
Short Circuit, Over Current and Reverse/Over Voltage Protection
High Temperature Operation
Compact size
– Maximize Available Space
Applications
12V / 24V Battery Systems
Wireless Access Points and Client Devices
IP Phone and Security Camera Systems
Description
The TP-DCDC Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability
solution for those requiring 18V to 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. They have an
integrated POE injector to apply the 48VDC to the CAT5 Ethernet cable. The output is regulated 18V, 24V or 48VDC
from an input voltage between 9VDC and 36VDC. They have two isolated inputs for connecting 2 power sources, like a
primary and backup power source. A metal enclosure model is available for industrial applications.
solution for those requiring 18V to 48VDC Power Over Ethernet voltage from a 12 or 24V battery system. They have an
integrated POE injector to apply the 48VDC to the CAT5 Ethernet cable. The output is regulated 18V, 24V or 48VDC
from an input voltage between 9VDC and 36VDC. They have two isolated inputs for connecting 2 power sources, like a
primary and backup power source. A metal enclosure model is available for industrial applications.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack.
They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). An IEEE 802.3af compliant model is
available for those applications requiring 802.3af handshake.
They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). An IEEE 802.3af compliant model is
available for those applications requiring 802.3af handshake.
They have various protections for surge, short circuit and overload. The units have power output up to 24W.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC
voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
Device Pinouts
RJ-45 Input (Data Only)
RJ-45 Output (Data & Power)
Pin
Symbol
Description
Symbol
Description
1
RX+
Data Receive(+)
RX+
Data Receive(+)
2
RX-
Data Receive(-)
RX-
Data Receive(-)
3
TX+
Data Transmit(+)
TX+
Data Transmit(+)
4
NC
No Connection
+Vdc
DC power(+)
5
NC
No Connection
+Vdc
DC power(+)
6
TX-
Data Transmit(-)
TX-
Data Transmit(-)
7
NC
No Connection
-Vdc
DC power(-)
8
NC
No Connection
-Vdc
DC power(-)
Specifications
DATA SHEET
TP-DCDC
TP-DCDC-1248M
(Metal Enclosure)
TP-DCDC-12xx