WCC WCC690 Manual Do Utilizador

THE FIRST STEP IS THOROUGH PLANNING BEFORE THE INSTALLATION 
BEGINS. THE SPEAKER SCREW HOLE CONFIGURATION WILL WORK WITH 
MOST DOMESTIC AND FOREIGN VEHICLES. FOLLOW THESE INSTRUCTIONS 
CAREFULLY TO ENSURE PROPER IMAGING AND MAXXIMUM PERFORMANCE.

Factory Speaker Replacement Location and Installation
1. Before you alter the vehicles interior materials, be sure there is
adequate room and clearance for the speaker depth to clear the windows and other 
moving parts. (See speaker measurement page).
2. If you are using the speaker wires provided in this kit, be sure to route wires through 
the factory door grommet as shown in the speaker mounting diagram.
3. After securing the speaker and checking clearances, connect the red/black speaker 
audio wires to the correct speaker + and - spade terminals.

Custom Speaker Location and Installation
1. Follow steps 1-3 above.
2. Use the speaker mounting diagrams and speaker hole cut-out
dimensions on the following pages.
3. Always mount the left and right side speakers on the same plane. 
This means that each speaker should be the same height from the floor and same 
distance from the firewall. Do not mount one speaker higher, lower, further forward or 
further behind the other.

Thank you for choosing West Coast Customs speakers for your car audio 
sound system. With proper installation, you are on the path to 
experiencing your music in a way you only imagined possible. 

The WCC series speakers have been designed for the enthusiast looking 
for great sound and excellent performance with the following features:

- Spade Style Speaker Terminals 
- Silk Dome Tweeter
- Crossover w/Variable Tweeter Attenuation
- Low Resonant ABS Composite Basket

 

- Composite Grill
- High Energy Magnet
- Polypropylene Cone
- Butyl Rubber Surround