Cisco Fiber Storage Shelf 15454-FBR-STRG= Ficha De Dados
Códigos do produto
15454-FBR-STRG=
Cisco Systems, Inc.
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 5
DATA SHEET
FIBER MANAGEMENT HARDWARE FOR THE CISCO ONS 15454
SONET/SDH MULTISERVICE TRANSPORT PLATFORMS
SONET/SDH MULTISERVICE TRANSPORT PLATFORMS
The Cisco
®
ONS 15454 SONET/SDH Multiservice Transport Platform (MSTP)
provides a comprehensive, intelligent dense wavelength-division multiplexing
(DWDM) solution for expanding bandwidth on metropolitan and regional networks.
PRODUCT OVERVIEW
The Cisco ONS 15454 MSTP provides an intelligent DWDM solution engineered to
reducing DWDM complexity and speeding the deployment of next-generation networking
solutions. The Cisco ONS 15454 fiber management hardware provides the necessary
supporting equipment to efficiently manage the fiber jumper cables used within a Cisco ONS
15454 MSTP deployment.
The Cisco ONS 15454 fiber management hardware is made up of two components: a fiber
storage shelf and a patch panel shelf.
The Cisco ONS 15454 Fiber Storage Shelf (FSS), illustrated in Figures 1 and 2, provides slack
storage for single patch-cords and ribbon fiber cables for Cisco ONS 15454 MSTP
deployments. It is used to maintain orderly fiber slack storage for intrashelf cabling as well
as for system-level cables. The FSS is engineered by Cisco Systems
®
to protect both single
and ribbon fiber cables from bend-induced losses by using large radius fiber storage reels and
bend-limiting fiber entrance hardware. A pull-out drawer allows access to the fiber storage
area and, when closed, protects the fiber jumpers from accidental damage. Table 1 outlines
fiber storage capacity. The Cisco FSS is equipped with a dual screw grounding point for
bonding to the facility ground.
Figure 1
Cisco ONS 15454 Fiber Storage Shelf
Cisco ONS 15454 Fiber Storage Shelf