Vantec UGT-PCE20SR Folheto

Compliant with PCI Express Specification 1.1
Supports x1, x4, x8, x16 PCI Express Bus
Support 2 x UART serial ports
Built-in 16C950 compatible UART
256 byte FIFO for transmit/receive 
Data transfer rate up to 230400bps
Plug-n-Play, I/O address and IRQ assigned by BIOS
Support Windows XP/Vista/7/8

This UGT-PCE20SR is part of a series of I/O card based on the PCI Express technology. It offers two independent Serial 
Communication ports that enable you to connect serial devices like Point of Sale terminals, modems, printers, scanners, 
cash registers, bar code readers, keypads, numeric displays, electrical scales, data acquisition equipment, and other serial 
devices for the PC and compatible systems. This card is designed to meet PCI Express Specification and with the standard 
or low profile brackets can be installed virtually in any PC with all major operating systems. The I/O address and IRQ are 
automatically configured to simplify the installation at the same time offers a reliable and high performance solution for 
Serial Communications.

Send us an e-mail at: inquiry@vantecusa.com

All Registered Trademarks Belong To Their Respective Companies                                                             Copyright © 2013 Vantec Thermal Technologies. All Rights Reserved.

www.vantecusa.com

Windows® XP/Vista/7/8 (32/64 bit)

One available PCI Express slot

1 x 2-Port Serial (RS-232) PCIe Host Card 

1 x Driver CD

1 x User Manual

2 x Low Profile Brackets

2-P

or

t Ser

ial PCIe