Philips Screeneo Smart LED Projector HDP1550TV HDP1550TV/10 Manual Do Utilizador
Códigos do produto
HDP1550TV/10
Network
19
Using WPS with Push Button
Configuration (PBC)
Configuration (PBC)
1 Switch the device on using the on/off key.
2 After the initial screen the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with OK.
5 Using ¡/¢ select Wireless and Networks.
6 Confirm with OK.
7 Using ¡/¢ select WIFI Selection.
8 Confirm with OK.
9 Use ¡/¢ to select the desired wireless network..
10 Confirm with OK.
11 Activate Push Button Configuration on the WLAN
access point. The WLAN access point and device
connect automatically and create a WPA protected
connection.
connect automatically and create a WPA protected
connection.
Wifi Hotspot
Use the portable Wi-Fi hotspot to share the device’s
network connection with computers or other devices
through the Wi-Fi network.
network connection with computers or other devices
through the Wi-Fi network.
Activating WiFi hotspot
1 Switch the device on using the on/off key.
2 After the initial screen, the main menu appears.
3 Use the navigation keys to select Settings.
4 Confirm with OK.
5 Using ¡/¢ select Wireless and Networks.
6 Confirm with OK.
7 Using ¡/¢ select WiFi Hotspot.
8 Confirm with OK.
9 Using ¡/¢ select Portable WiFi Hotspot.
10 Confirm with OK.
11 Using ¡/¢ select On.
12 Confirm with OK.
The projector is now visible by other Wifi devices.
Notice
Important!
The projector can work as an access point, if
only a wired lan network is installed in the
location of use.
only a wired lan network is installed in the
location of use.
Notice
Connection!
When the WiFi hotspot mode is activated, it
takes priority over the other connections.
takes priority over the other connections.
LU UST.book Page 19 Jeudi, 26. décembre 2013 9:48 09