Amer Networks OWL-300HAP Folheto
OWL-300HAP
www.amer.com
sales@amer.com
Revision 2.01
Specifications subject to change without notice. Errors and omissions excepted. All trademarks are properties of their respective owners.
1-800-262-9703
The OWL-300HAP is an outdoor wireless access point/
customer-premise equipment supporting IEEE802.11n
and is backward compatible with IEEE802.11b/g/n.
The unit is a perfect choice for SOHO, SMB or enterprise
applications. It supports 4 operation modes that include
Router, Bridge, WISP and AP mode. With its built in DHCP,
WDS and a variety of other features that provide high flexibility in wireless deployment. The OWL-300HAP supports passive PoE with the included
injector that allows for the flexible and easy installation of the unit where there is no accessible power source.
customer-premise equipment supporting IEEE802.11n
and is backward compatible with IEEE802.11b/g/n.
The unit is a perfect choice for SOHO, SMB or enterprise
applications. It supports 4 operation modes that include
Router, Bridge, WISP and AP mode. With its built in DHCP,
WDS and a variety of other features that provide high flexibility in wireless deployment. The OWL-300HAP supports passive PoE with the included
injector that allows for the flexible and easy installation of the unit where there is no accessible power source.
Key Features and Benefits
IEEE802.11bgn support at 2.4GHz
•
Industry standard wireless support allowing
cross-vendor compatibility on both 802.11n
and backward compatibility to older 802.11b/g
equipment.
Multiple Operational Modes:
•
- Router Mode: Allows the unit to be set up
as an Internet gateway/router to give wireless
access to a ADSL or Cable modem connected
through the WAN port. In this mode the WAN
port supports PPPOE, DHCP Client, PPTP
Client L2TP client or Static IP.
- WISP Mode: Wireless ISP mode allows the unit
to connect to a wireless Internet Service Providers
Access Point. This allows for the connection to the
internet wirelessly through 802.11bgn. In this mode
the WAN page can be set up to support PPPOE,
DHCP Client, PPTP Client L2TP client or Static IP.
- AP Mode: Allows the unit to be configured to allow other wireless devices to access an existing wired network.
- Bridge: In this mode the unit would be configured as an extender and allow the wireless signal from one source to be rebroadcasted, extending
the range of the wireless access.
Passive PoE Support
•
With the PoE support power can be supplied through the included PoE adapter onto a RJ-45 cable to the unit. This allows power to be sent to the
device when there is no easy power source for it to be connected to.
DHCP Server and Client Support
•
The OWL-300HAP supports DHCP in both Client and Server modes. In server mode the unit can assign IP addresses to client devices connected
to it. In Client mode the unit can have its IP address set by the networks DHCP server.
Application
OWL-300HAP
802.11b/g/n 300 Mbps Long-Range Wireless Outdoor PoE AP/CPE