Philips Wireless surround cinema speakers HTL9100 HTL9100/79 Manual Do Utilizador

Códigos do produto

HTL9100/79

Wireless subwoofer

The SoundBar comes with a wireless subwoofer.

CONNECT

Press to to enter the pairing mode for the

subwoofer.

Subwoofer indicator

• When the power is turned on, the

indicator lights up.

• During wireless pairing between the

subwoofer and the main unit, the

indicator blinks white quickly.

• When the pairing succeeds, the

indicator lights up white.

• When the pairing fails, the indicator

blinks white slowly.

AC MAINS~

Connect to the power supply.

3 Connect and set

This section helps you connect your SoundBar

to a TV and other devices, and then set it up.

For information about the basic connections of

your SoundBar and accessories, see the quick

start guide.

Note

•

For identification and supply ratings, see the type plate

at the back or bottom of the product.

•

Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Charge speakers

If the wireless surround speaker is undocked

from the main unit, its battery level is indicated

by the indicator on the speaker.

• Light up white: full battery

• Light up red: low battery level (less than

30% remaining)

• Flash red: near empty (less than 10%

remaining)

Dock your speakers onto the main unit to

charge the speakers.

Turn on the main unit.

During charging, the indicator on the

speaker lights up amber.